3Ton hydraulic diesel forklift
1.Strong power system
2.Dynamic braking system
3.Rolling steel wide vision mast
4,High position air filter
Advantages:
This new series forklifts with the latest technical design will provide you exvcellent operating performance, and make your work handier by high standard performance, comfortable drving experience and the simple and safe operation.
Environmental Friendly
-The emission meets EC new regulation
-High efficiency hydraulic system to lower the fuel consumption
-Using enviromental friendly material
-Damping device on mast to reduce impact and vibration
-Sound insulating an absorbing device are used to reduce the noise
Ergonomic design
-Using power braking system to reduce footplate strength
-Contrli lever right located to effectivrly reeduce drivers arm tiredness
-Dual combined switch lever as a car to enable easy operating
-Wide mast with good visibility
-Wide space for boarding and driving, increasing leg space
-Enginr automatic monitor control, when the engine oil pressure is too low or water temprature is too high, the engine wiil be automatically shut off
Safety performance
-Enlose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety
-Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned
-Safety device in mast hydraulic system prevents material falling down in case of hose broken
-High pressure hose is designed far away from the driver
-Safety wire harness, using waterproof
MAIN SPECIFICATION
| Model | unit | CPCD30 |
| Load capacity | kg | 3000 |
| Load center | mm | 500 |
| Operating at maximum height | mm | 4260 |
| Mast tilt angle | º | 6/12 |
| Hold under mast (min ) | mm | 110 |
| Turning radius(min) | mm | 2480 |
| Drive speed(F/B)max | km/h | 20/19.5 |
| Lifting speed(max) | mm/s | 470/520 |
| Falling speed | mm/s | <600 |
| Gradeability | % | 15 |
| complete size (L*W) | mm | 3817*1230 |
| Fork size (L*W*T) | MM | 1070*125*45 |
| Closed mast height | mm | 2055 |
| Overhead guard height | mm | 2085 |
| Fork spacing adjustment | mm | 250-1090 |
| Wheel base | mm | 2000 |
| Wheel distance (F/B) | mm | 1000/970 |
| Stopping distance (unloaded) | mm | 4000 |
| Tire(F/B) | 28*9-15-12PR/6.50-10-10PR | |
| Engine displacement | L | 2.5 |
| Rate power/speed | kw/rpm | 37/2650 |
| Engine rate torque | nm/rpm | 148/2000 |
| Fule tank capacity | L | 58 |
| Total weight | KG | 4350 |
